Loading ...

Sensor for environmental monitoring air temperature

Systems for environmental monitoring and remote control

SENSORS > TEMPERATURE
UTAI
Thermoigrometric sensor for indoor applications

DESCRIPTION

Sensor for measuring the temperature and humidity of the air in indoor environments. Compact and robust, can be interfaced to a form of wireless transmission that uses the ZigBee protocol in such a way as to make possible the creation of a network consisting of multiple sensors, directly acquirable by a datalogger series TMF100 or TMF500 Nesa through appropriate gateway. The sensor is equipped with electrical protections and is available with various signal outputs.

FEATURES

  • Accurate and reliable indoor Air Humidity & Temperature Sensor with Pt100 1/3DIN and capacity
  • According to WMO standards
  • Size and weight compact
  • Range: -40 ÷ +80°C (others on request) [0 ÷ 100%Rh]
  • Resolution: 0.015°C , [0.1%]
  • Accuracy: DIN 43760 1/3DIN (±0,1°C), [± 2% f.s.]
  • Response time: <60s
  • Operating conditions: : -40 ÷ +80°C
  • Output signal: Pt100 (100Ω @ 0°C) [0÷1Vdc], (0÷2Vdc o 4÷20mA, RS485/Modbus with MCS option on request)
  • Power supply: 10÷30Vdc

ACCESSORIES

SENSORS SENSORS UTAI detail

Bracket / Arm Support

Fixing system for Nesa's sensors, composed by an arm of different lengths (50cm, 90cm, 150cm) and thermoplastic resin clam for external, able to withstand to extreme temperature and to solar radiation.
Two stainless steel screws for the tightening of the clamp on the sensor complete the equipment.

SENSORS SENSORS UTAI detail

MCS Signal Conditioning Module

Single channel module for conditioning digital and analog electrical signals. Fully programmable for binding input/output with the USB interface available as an option. The full data sheet is available at this address. main features:

  • Programmable input signals: Pt100, thermopiles, Voltages up to 2Vdc, Current 0÷20mA or 4÷20mA, frequency up to 1000Hz, Counter for pulses (1ms min)
  • • Programmable Output signals: voltage 0÷2Vdc; Current 0÷20mA or 4÷20mA Serial RS485 (command line); Modbus RS485
  • • Resolution: 18 bits with over 262,000 points
  • • Operating conditions: -40 ÷ +80°C
  • • DIN rail mounting
  • • Power supply: 10÷30Vdc (typ. 4mA@12 Vdc)

SENSORS SENSORS UTAI detail

SPECIAL CABLE

NPI shielded cable. With IP68 waterproof connector for connecting to the sensor, and terminal sleeves for insertion into the terminal blocks. Available in any length.

SENSORS SENSORS UTAI detail

Standard cable

Shielded multi-core cable for indoor/outdoor use, suitable for hot and cold climates.
With IP68 waterproof connector for connecting the sensor, and PS2 plug connector for direct connection to the data logger or with terminal sleeves for insertion into the terminal blocks. Our cables are standard for most our sensors.
Available in different lengths starting from 1m.

CONTACT US
We remain at you disposal for further information

Use the contact form below to submit your request.
All the personal data entered will be used only to answer your inquiries

* Required fields
Enter your data and request
Otherwise call us at +39 0423.985209

NESA Srl - Via Crociera, 11 - 31020 - Vidor (TV) - Italy
Tel+39.0423.985209 - Fax+39.0423.985305
e-mail: info@nesasrl.it
C.F. e P.IVA. 01422830990