Loading ...

Sensors for environmental monitoring wind

Systems for environmental monitoring and remote control

SENSORS > WIND SPEED & DIRECTION
FAT
Air flow sensor (0 ÷ 5m/s)

DESCRIPTION

Sensor for the measurement of the air flow with hot wire omnidirectional probe that allows to obtain both the measurement of air speed and the temperature. Thanks to the different types of standard electrical outputs (voltage and current), or digital RS485 with ModBus protocol (option MCS), allows it to be easily interfaced with any acquisition system.

FEATURES

  • Sensor for the measurement of the air flow with high sensitivity (<0.01 m/s)
  • Range: 0÷5m/s (flow), -20 ÷ +80°C (temperature)
  • Accuracy: ± 0.02 m/s (temperature compensated from 0÷80°C) ± 0.3°C
  • Omnidirectional
  • Output signal: dual 4÷20mA output (0÷2Vdc, RS485 or Modbus on request with double MCS module)
  • Operating conditions: -30 ÷ 110°C
  • Power supply: 10 ÷ 30Vdc (typ. <0.5W)

ACCESSORIES

SENSORS SENSORS fat detail

Bracket / Arm Support

Fixing system for Nesa's sensors, composed by an arm of different lengths (50cm, 90cm, 150cm) and thermoplastic resin clam for external, able to withstand to extreme temperature and to solar radiation.
Two stainless steel screws for the tightening of the clamp on the sensor complete the equipment.

SENSORS SENSORS fat detail

MCS Signal Conditioning Module

Single channel module for conditioning digital and analog electrical signals. Fully programmable for binding input/output with the USB interface available as an option. The full data sheet is available at this address. main features:

  • Programmable input signals: Pt100, thermopiles, Voltages up to 2Vdc, Current 0÷20mA or 4÷20mA, frequency up to 1000Hz, Counter for pulses (1ms min)
  • • Programmable Output signals: voltage 0÷2Vdc; Current 0÷20mA or 4÷20mA Serial RS485 (command line); Modbus RS485
  • • Resolution: 18 bits with over 262,000 points
  • • Operating conditions: -40 ÷ +80°C
  • • DIN rail mounting
  • • Power supply: 10÷30Vdc (typ. 4mA@12 Vdc)

SENSORS SENSORS fat detail

SPECIAL CABLE

NPI shielded cable. With IP68 waterproof connector for connecting to the sensor, and terminal sleeves for insertion into the terminal blocks. Available in any length.

SENSORS SENSORS fat detail

Standard cable

Shielded multi-core cable for indoor/outdoor use, suitable for hot and cold climates.
With IP68 waterproof connector for connecting the sensor, and PS2 plug connector for direct connection to the data logger or with terminal sleeves for insertion into the terminal blocks. Our cables are standard for most our sensors.
Available in different lengths starting from 1m.

CONTACT US
We remain at you disposal for further information

Use the contact form below to submit your request.
All the personal data entered will be used only to answer your inquiries

* Required fields
Enter your data and request
Otherwise call us at +39 0423.985209

NESA Srl - Via Crociera, 11 - 31020 - Vidor (TV) - Italy
Tel+39.0423.985209 - Fax+39.0423.985305
e-mail: info@nesasrl.it
C.F. e P.IVA. 01422830990